Tips on How to Jump Start Another Car

Before jumping another vehicle, be sure you have a good pair of work gloves, safety glasses, and a wire brush handy. Bring the one vehicle as close to the nose of the disabled car, then turn off the car and open both hoods. Put on your gloves and glasses and scrub any corrosion off either battery terminal. Place the red jumper cable on the positive terminal on the dead battery, then the other end to the positive side of the good battery.

Take the black cable and place on the negative side of the good battery. Now look for a bare metal surface on the car being jumped and attach the last black cable there. Start the car, wait a few minutes, start the other car and remove the cables in reverse order. Preserve the investment that you made in your vehicle by reaching out to the service department at Wynn Volvo Cars Norristown for a vehicle inspection.

 
Categories: Social

Comments

Nothing posted yet.
;